Installation of Twonky Server 7 on NAS-devices

After a few requests i’ve now tried to install Twonky Server 7 on the NAS_Devices and i can tell you that it works. The following article describes the installation. Before you proceed please check here if Version 7.11-Special is still the current version. If not, please add a comment below.

This tutorial requires an installed fun_plug!

Continue reading Installation of Twonky Server 7 on NAS-devices

Output of /proc/meminfo on the D-Link DNS-345

Here the output of cat /proc/meminfo on the D-Link DNS-345:

MemTotal:         509888 kB
MemFree:          326148 kB
Buffers:           13680 kB
Cached:           119420 kB
SwapCached:            0 kB
Active:            71972 kB
Inactive:          70396 kB
Active(anon):       9268 kB
Inactive(anon):        0 kB
Active(file):      62704 kB
Inactive(file):    70396 kB
Unevictable:           0 kB
Mlocked:               0 kB
SwapTotal:        524216 kB
SwapFree:         524216 kB
Dirty:                12 kB
Writeback:             0 kB
AnonPages:          9264 kB
Mapped:             8940 kB
Slab:              22932 kB
SReclaimable:       7084 kB
SUnreclaim:        15848 kB
PageTables:          508 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:      779160 kB
Committed_AS:      61932 kB
VmallocTotal:     122880 kB
VmallocUsed:        1668 kB
VmallocChunk:     119804 kB

Output of /proc/cpuinfo on the D-Link DNS-345

Here the output of cat /proc/cpuinfo on the D-Link DNS-345:

Processor       : Feroceon 88FR131 rev 1 (v5l)
BogoMIPS        : 1599.07
Features        : swp half thumb fastmult edsp
CPU implementer : 0x56
CPU architecture: 5TE
CPU variant     : 0x2
CPU part        : 0x131
CPU revision    : 1
 
Hardware        : Feroceon-KW
Revision        : 0000
Serial          : 0000000000000000

D-Link DNS-345 Sharecenter Quattro – A new 4-Bay NAS

Today i’ve search through the various country-FTP-sites of D-Link and found a few hints regarding a new NAS from D-Link, the DNS-345. The NAS is a 4-Bay-NAS featuring nearly everything you might dream of. But i’ll beginn from the start.

According to the Datasheet (Mirror) and the Manual (Mirror), the DNS-345 can hold up to 12TB of S-ATA-Harddisks (4*3TB) which can be configured as RAID 1/5/5+Hotspare/10/Single Disk/JBOD. The data can be transferred using the two 10/100/1000Mbit Ethernet Ports, which can be configured for Link Aggregation in various modes.

The Front bezel contains a OLED Display with 128×32 Pixels resolution which can show various informations about the current state of the device like the System Information/Temperature, LAN/Volume status and USB Backups.

The device weights 2.7kg, it’s dimensions are (W*D*H) 128 x 200 x 178 mm. It operates from 0°C to 40°C. The external power adapter provides 19V with 4.74A; the NAS consumes about 53W in normal operation and 13.5W in Sleep mode.

The most important thing: The device is fun_plug-enabled!
Continue reading D-Link DNS-345 Sharecenter Quattro – A new 4-Bay NAS