After a few requests i’ve now tried to install Twonky Server 7 on the NAS_Devices and i can tell you that it works. The following article describes the installation. Before you proceed please check here if Version 7.11-Special is still the current version. If not, please add a comment below.
This tutorial requires an installed fun_plug!
Continue reading Installation of Twonky Server 7 on NAS-devices
Here the output of cat /proc/meminfo on the D-Link DNS-345:
MemTotal: 509888 kB MemFree: 326148 kB Buffers: 13680 kB Cached: 119420 kB SwapCached: 0 kB Active: 71972 kB Inactive: 70396 kB Active(anon): 9268 kB Inactive(anon): 0 kB Active(file): 62704 kB Inactive(file): 70396 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 524216 kB SwapFree: 524216 kB Dirty: 12 kB Writeback: 0 kB AnonPages: 9264 kB Mapped: 8940 kB Slab: 22932 kB SReclaimable: 7084 kB SUnreclaim: 15848 kB PageTables: 508 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 779160 kB Committed_AS: 61932 kB VmallocTotal: 122880 kB VmallocUsed: 1668 kB VmallocChunk: 119804 kB
Here the output of cat /proc/cpuinfo on the D-Link DNS-345:
Processor : Feroceon 88FR131 rev 1 (v5l) BogoMIPS : 1599.07 Features : swp half thumb fastmult edsp CPU implementer : 0x56 CPU architecture: 5TE CPU variant : 0x2 CPU part : 0x131 CPU revision : 1 Hardware : Feroceon-KW Revision : 0000 Serial : 0000000000000000
Today i’ve search through the various country-FTP-sites of D-Link and found a few hints regarding a new NAS from D-Link, the DNS-345. The NAS is a 4-Bay-NAS featuring nearly everything you might dream of. But i’ll beginn from the start.
According to the Datasheet (Mirror) and the Manual (Mirror), the DNS-345 can hold up to 12TB of S-ATA-Harddisks (4*3TB) which can be configured as RAID 1/5/5+Hotspare/10/Single Disk/JBOD. The data can be transferred using the two 10/100/1000Mbit Ethernet Ports, which can be configured for Link Aggregation in various modes.
The Front bezel contains a OLED Display with 128×32 Pixels resolution which can show various informations about the current state of the device like the System Information/Temperature, LAN/Volume status and USB Backups.
The device weights 2.7kg, it’s dimensions are (W*D*H) 128 x 200 x 178 mm. It operates from 0°C to 40°C. The external power adapter provides 19V with 4.74A; the NAS consumes about 53W in normal operation and 13.5W in Sleep mode.
The most important thing: The device is fun_plug-enabled!
Continue reading D-Link DNS-345 Sharecenter Quattro – A new 4-Bay NAS