The CH3SNAS seems to be targetted at home users with enough experience to set up a basic wired- or wirless network. Some effort was clearly invested in making the configuration of the system painless. The device and its manual thus do quite some handholding for the novice user to get the device to work as intended. The device and its manual unfortunately do not provide guidelines for novice users about suitable backup strategies or ways to safeguard their data. This may be current practice for this type of product, but is a problem when you give novice users the storage capacity to e.g. save all their home videos on a single drive or device. [IMO vendor should do something about this in printed manual, but volunteer to create a page on [[Data backup do’s and don’ts]]?]
The device does contain some optional features and settings (such as an FTP server or options for setting IP addresses) which are suited for more technically oriented users.
For the real enthusiasts (hobbyists, students, IT professionals) the CH3SNAS and some of its competitors provide
Compatibility with Microsoft Windows
The CH3SNAS is simplest to access for PCs running a version of Windows. This is because the access protocols are based on a set of proprietary Microsoft standards (MSB/CIFS) which are supported by Windows itself. Thus, to a PC running Microsoft Windows, the NAS looks exactly like another PC with one or more shared drives (see screenshot) and possibly a shared printer. No special software is therefore needed under Microsoft Windows to access or configure the CH3SNAS.
Although an EasySearch utility is provided to simplify initial network setup for non-technical users, it is relatively easy to set up the NAS without this using the written documentation. The actual configuration of the NAS (e.g. drive formatting, access control, enabling FTP) is done using a web browser (default IP address 192.168.0.20).
Compatibility with Linux PCs
Internally, the device runs a small Linux distribution and an open-source file sever (called a Samba server). This is presumably to keep the materials costs (smaller processor, less emory), development cost (open source) and power consumption of the device down.
The CH3SNAS can also be accessed by Linux PCs: although LINUX natively tends to use a UNIX equivalent (NFS) to the Microsoft protocols provided by the CH3SNAS, Samba client support is relatively standard in Linux distributions. Although setting up access to from a Linux PC will, however, be a bit trickier than from a PC running Microsoft Windows, this is not necessarily an issue for typical Linux users.
Alternatively, Linux PCs users can access an implementation of NFS which is hidden in the 1.03 firmware, but is not accessible via the web-based configuration interface (yet). A tutorial on to access this hidden feature will be provided in the future. For urgent needs, see the personal Blog of Dennis, a former employee of Conceptronic.
Compatibility with Apple computers
The CH3SNAS does not natively support Apple’s AppleTalk protocol suite (roughly Apple’s equivalent of Microsoft’s SMB/CIFS). Modifications are possible to support this. This involves installing the open source Nettatalk server via the use of FunPlug.
Compatibility with the Playstation 3
The CH3SNAS is sometimes used with Sony’s Playstation 3 for wireless streaming of multimedia. In this scenario, the PS3 discovers the CH3SNAS using uPnP and uses uPnP to display available tracks/videos.
Compatibility with the XboX 360
As of Firmware 1.05, the CH3SNAS can be discovered by the XboX 360 for streaming multimedia content to the XboX.
One thought on “Usage scenarios and target users of the Conceptronic CH3SNAS”