Twitter Weekly Updates for 2011-08-14

  • uwfancontrol: Updated 1.2 (includes support for DNS-320/DNS-325!) #funplug #
  • xz: Updated to 5.0.3 #funplug #
  • gnupg: Version 2.0.18 added #funplug #
  • libassuan: Updated to 2.0.2 #funplug #
  • libgcrypt: Updated to 1.5.0 #funplug #
  • nettle: Updated to 2.2 #funplug #
  • p11-kit: Version 0.3 added #funplug #
  • freetype: Version 2.4.6 added #
  • vnstat: Updated to 1.11 #funplug #
  • curl: Updated to 7.21.7 #
  • iperf: Updated to 2.0.5 #
  • openvpn: Updated to 2.2.1 #funplug #
  • dnsmasq: Updated to 2.57 #funplug #
  • mysql: Updated to 5.1.58 #funplug #
  • php: Recompiled with mysqlnd & freetype (PHP5.3 is still crashing, so still 5.2.17) #funplug #

Published by

Uli

IT-Nerd und Admin

2 thoughts on “Twitter Weekly Updates for 2011-08-14”

  1. Hello Uli,
    uwfancontrol will not work for DNS-320(5) because temperature cannot be obtained by calling

    temperature g 0

    return value is always “0”. I know only about

    FT_testing -T

    command to obtain system temperature.

    From the other hand:
    USB permissions fix – is there any news about it ? I solved this problem “my way” : using perl script to save ownership and permissions to file and on each start after USB is mounted I set this permissions. It works for a while. It is not 100% because from time to time this happens :

    Sep 8 23:58:53 GyngyNAS login_mgr.cgi: admin logged in.
    Sep 9 00:00:04 GyngyNAS kernel:
    Sep 9 00:00:04 GyngyNAS kernel: ***************************************
    Sep 9 00:00:04 GyngyNAS kernel: * HD1 stand by now! *
    Sep 9 00:00:04 GyngyNAS kernel: ***************************************
    Sep 9 00:05:07 GyngyNAS kernel:
    Sep 9 00:05:07 GyngyNAS kernel: ***************************************
    Sep 9 00:05:07 GyngyNAS kernel: * HD0 stand by now! *
    Sep 9 00:05:07 GyngyNAS kernel: ***************************************
    Sep 9 00:06:30 GyngyNAS smbd: CIFS: [172.1.1.122] closed the connection to service [USBDisk1_1].
    Sep 9 00:08:14 GyngyNAS login_mgr.cgi: admin logged out.
    Sep 9 05:29:28 GyngyNAS kernel: usb 1-1: USB disconnect, address 2
    Sep 9 05:29:28 GyngyNAS kernel: usb 1-1.1: USB disconnect, address 3
    Sep 9 05:29:28 GyngyNAS kernel: hub 1-1:1.0: cannot reset port 1 (err = -71)
    Sep 9 05:29:28 GyngyNAS kernel: hub 1-1:1.0: cannot reset port 1 (err = -19)
    Sep 9 05:29:28 GyngyNAS kernel: hub 1-1:1.0: cannot disable port 1 (err = -19)
    Sep 9 05:29:28 GyngyNAS kernel: hub 1-1:1.0: cannot reset port 1 (err = -19)
    Sep 9 05:29:28 GyngyNAS kernel: hub 1-1:1.0: cannot disable port 1 (err = -19)
    Sep 9 05:29:28 GyngyNAS kernel: hub 1-1:1.0: cannot reset port 1 (err = -19)
    Sep 9 05:29:28 GyngyNAS kernel: hub 1-1:1.0: cannot disable port 1 (err = -19)
    Sep 9 05:29:28 GyngyNAS kernel: hub 1-1:1.0: cannot reset port 1 (err = -19)
    Sep 9 05:29:28 GyngyNAS kernel: hub 1-1:1.0: cannot disable port 1 (err = -19)
    Sep 9 05:29:28 GyngyNAS kernel: hub 1-1:1.0: cannot disable port 1 (err = -19)
    Sep 9 05:29:28 GyngyNAS kernel: sd 2:0:0:0: [sdc] Result: hostbyte=0x01 driverbyte=0x00
    Sep 9 05:29:28 GyngyNAS kernel: end_request: I/O error, dev sdc, sector 11010519
    Sep 9 05:29:28 GyngyNAS kernel: Buffer I/O error on device sdc1, logical block 1376307
    Sep 9 05:29:28 GyngyNAS kernel: lost page write due to I/O error on sdc1
    Sep 9 05:29:28 GyngyNAS kernel: Buffer I/O error on device sdc1, logical block 0
    Sep 9 05:29:28 GyngyNAS kernel: lost page write due to I/O error on sdc1
    Sep 9 05:29:28 GyngyNAS kernel: EXT2-fs error (device sdc1): ext2_get_inode: unable to read inode block – inode=678890, block=1376307
    Sep 9 05:29:28 GyngyNAS kernel: Buffer I/O error on device sdc1, logical block 0
    Sep 9 05:29:28 GyngyNAS kernel: lost page write due to I/O error on sdc1
    Sep 9 05:29:28 GyngyNAS kernel: EXT2-fs error (device sdc1): ext2_get_inode: unable to read inode block – inode=678885, block=1376307
    Sep 9 05:29:28 GyngyNAS kernel: Buffer I/O error on device sdc1, logical block 950276
    Sep 9 05:29:28 GyngyNAS kernel: lost page write due to I/O error on sdc1
    Sep 9 05:29:28 GyngyNAS kernel: Buffer I/O error on device sdc1, logical block 950277
    Sep 9 05:29:28 GyngyNAS kernel: lost page write due to I/O error on sdc1
    Sep 9 05:29:28 GyngyNAS kernel: Buffer I/O error on device sdc1, logical block 950288
    Sep 9 05:29:28 GyngyNAS kernel: lost page write due to I/O error on sdc1
    Sep 9 05:29:28 GyngyNAS kernel: Buffer I/O error on device sdc1, logical block 950291
    Sep 9 05:29:28 GyngyNAS kernel: lost page write due to I/O error on sdc1
    Sep 9 05:29:28 GyngyNAS kernel: Buffer I/O error on device sdc1, logical block 950293
    Sep 9 05:29:28 GyngyNAS kernel: lost page write due to I/O error on sdc1
    Sep 9 05:29:29 GyngyNAS kernel: usb 1-1: new high speed USB device using ehci_marvell and address 4
    Sep 9 05:29:29 GyngyNAS kernel: usb 1-1: configuration #1 chosen from 1 choice
    Sep 9 05:29:29 GyngyNAS kernel: hub 1-1:1.0: USB hub found
    Sep 9 05:29:29 GyngyNAS kernel: hub 1-1:1.0: 4 ports detected
    Sep 9 05:29:29 GyngyNAS kernel: usb 1-1.1: new high speed USB device using ehci_marvell and address 5
    Sep 9 05:29:30 GyngyNAS kernel: usb 1-1.1: configuration #1 chosen from 1 choice
    Sep 9 05:29:30 GyngyNAS kernel: scsi3 : SCSI emulation for USB Mass Storage devices
    Sep 9 05:29:30 GyngyNAS kernel: usb-storage: device found at 5
    Sep 9 05:29:30 GyngyNAS kernel: usb-storage: waiting for device to settle before scanning
    Sep 9 05:29:35 GyngyNAS kernel: scsi 3:0:0:0: Direct-Access Verbatim STORE N GO 5.00 PQ: 0 ANSI: 0 CCS
    Sep 9 05:29:35 GyngyNAS kernel: sd 3:0:0:0: [sdd] 15240576 512-byte hardware sectors (7803 MB)
    Sep 9 05:29:35 GyngyNAS kernel: sd 3:0:0:0: [sdd] Write Protect is off
    Sep 9 05:29:35 GyngyNAS kernel: sd 3:0:0:0: [sdd] Mode Sense: 23 00 00 00
    Sep 9 05:29:35 GyngyNAS kernel: sd 3:0:0:0: [sdd] Assuming drive cache: write through
    Sep 9 05:29:35 GyngyNAS kernel: sd 3:0:0:0: [sdd] 15240576 512-byte hardware sectors (7803 MB)
    Sep 9 05:29:35 GyngyNAS kernel: sd 3:0:0:0: [sdd] Write Protect is off
    Sep 9 05:29:35 GyngyNAS kernel: sd 3:0:0:0: [sdd] Mode Sense: 23 00 00 00
    Sep 9 05:29:35 GyngyNAS kernel: sd 3:0:0:0: [sdd] Assuming drive cache: write through
    Sep 9 05:29:35 GyngyNAS kernel: sdd:
    Sep 9 05:29:35 GyngyNAS kernel: sdd1
    Sep 9 05:29:35 GyngyNAS kernel: sd 3:0:0:0: [sdd] Attached SCSI removable disk
    Sep 9 05:29:35 GyngyNAS kernel: sd 3:0:0:0: Attached scsi generic sg2 type 0
    Sep 9 05:29:35 GyngyNAS kernel: usb-storage: device scan complete
    Sep 9 05:29:48 GyngyNAS kernel: scsi 2:0:0:0: rejecting I/O to dead device
    Sep 9 05:29:48 GyngyNAS kernel: scsi 2:0:0:0: rejecting I/O to dead device
    Sep 9 05:29:48 GyngyNAS kernel: scsi 2:0:0:0: rejecting I/O to dead device
    Sep 9 05:29:48 GyngyNAS kernel: printk: 6 messages suppressed.
    Sep 9 05:29:48 GyngyNAS kernel: Buffer I/O error on device sdc1, logical block 0
    Sep 9 05:29:48 GyngyNAS kernel: lost page write due to I/O error on sdc1
    Sep 9 05:29:48 GyngyNAS kernel: EXT2-fs error (device sdc1): ext2_get_inode: unable to read inode block – inode=11, block=4
    Sep 9 05:29:56 GyngyNAS kernel:
    Sep 9 05:29:56 GyngyNAS kernel: #######################################
    Sep 9 05:29:56 GyngyNAS kernel: # HD0 awake now ! #
    Sep 9 05:29:56 GyngyNAS kernel: #######################################
    Sep 9 05:29:58 GyngyNAS kernel:
    Sep 9 05:29:58 GyngyNAS kernel: #######################################
    Sep 9 05:29:58 GyngyNAS kernel: # HD1 awake now ! #
    Sep 9 05:29:58 GyngyNAS kernel: #######################################
    Sep 9 05:30:07 GyngyNAS ftp: FTP server disable.
    Sep 9 05:30:07 GyngyNAS ftp: FTP server enabled.
    Sep 9 05:30:08 GyngyNAS kernel: NTFS driver 2.1.28 [Flags: R/O MODULE].
    Sep 9 05:30:15 GyngyNAS usb_disk: Mount USB Storage.
    Sep 9 05:30:18 GyngyNAS ftp: FTP server disable.
    Sep 9 05:30:18 GyngyNAS ftp: FTP server enabled.
    Sep 9 05:31:01 GyngyNAS fan_control: Set Fan-Control Mode To “Auto(Off/Low/High)”.
    Sep 9 05:31:02 GyngyNAS fan_control: Set Fan Speed To “Stop”.
    Sep 9 05:31:35 GyngyNAS kernel: scsi 2:0:0:0: rejecting I/O to dead device
    Sep 9 05:31:35 GyngyNAS kernel: scsi 2:0:0:0: rejecting I/O to dead device
    Sep 9 05:31:35 GyngyNAS kernel: scsi 2:0:0:0: rejecting I/O to dead device
    Sep 9 05:31:35 GyngyNAS kernel: Buffer I/O error on device sdc1, logical block 0
    Sep 9 05:31:35 GyngyNAS kernel: lost page write due to I/O error on sdc1
    Sep 9 05:31:35 GyngyNAS kernel: EXT2-fs error (device sdc1): ext2_get_inode: unable to read inode block – inode=11, block=4
    Sep 9 05:40:10 GyngyNAS kernel:
    Sep 9 05:40:10 GyngyNAS kernel: ***************************************
    Sep 9 05:40:10 GyngyNAS kernel: * HD1 stand by now! *
    Sep 9 05:40:10 GyngyNAS kernel: ***************************************
    Sep 9 05:40:10 GyngyNAS kernel:
    Sep 9 05:40:10 GyngyNAS kernel: ***************************************
    Sep 9 05:40:10 GyngyNAS kernel: * HD0 stand by now! *
    Sep 9 05:40:10 GyngyNAS kernel: ***************************************

    It was in the middle of the night and no action was planned (cron or else).

    1. I will answer myself about second point (USB flash disk disconnection).

      I plug USB flash disk directly to NAS instead of plugging USB HUB (passive) and it looks like this was the issue. Now I am able to run FFP and transmission from USB flash disk drive and my drives are standby all the time while I do not use them.

Leave a Reply

Your email address will not be published. Required fields are marked *