Output of /proc/cpuinfo on the D-Link DNS-325

Here the output of cat cat /proc/cpuinfo on the D-Link DNS-325:

Processor       : ARM926EJ-S rev 1 (v5l)
BogoMIPS        : 1196.03
Features        : swp half thumb fastmult edsp
CPU implementer : 0x56
CPU architecture: 5TE
CPU variant     : 0x2
CPU part        : 0x131
CPU revision    : 1
Cache type      : write-back
Cache clean     : cp15 c7 ops
Cache lockdown  : format C
Cache format    : Harvard
I size          : 16384
I assoc         : 4
I line length   : 32
I sets          : 128
D size          : 16384
D assoc         : 4
D line length   : 32
D sets          : 128
 
Hardware        : Feroceon-KW
Revision        : 0000
Serial          : 0000000000000000

Output of /proc/meminfo on the D-Link DNS-325

Here the output of cat cat /proc/meminfo on the D-Link DNS-325:

MemTotal:       255472 kB
MemFree:        115328 kB
Buffers:         22200 kB
Cached:          90708 kB
SwapCached:          0 kB
Active:          65260 kB
Inactive:        56680 kB
SwapTotal:      530040 kB
SwapFree:       530040 kB
Dirty:               4 kB
Writeback:           0 kB
AnonPages:        9048 kB
Mapped:           9948 kB
Slab:            15024 kB
SReclaimable:     5036 kB
SUnreclaim:       9988 kB
PageTables:        488 kB
NFS_Unstable:        0 kB
Bounce:              0 kB
CommitLimit:    657776 kB
Committed_AS:    55196 kB
VmallocTotal:   385024 kB
VmallocUsed:      1284 kB
VmallocChunk:   383736 kB

Output of dmesg on the D-Link DNS-325

Here the output of dmesg on the D-Link DNS-325:

Linux version 2.6.22.18 (jack@SWTEST1) (gcc version 4.2.1) #14 Mon Nov 1 22:16:19 CST 2010
CPU: ARM926EJ-S [56251311] revision 1 (ARMv5TE), cr=00053977
Machine: Feroceon-KW
Using UBoot passing parameters structure
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 65536
  DMA zone: 512 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 65024 pages, LIFO batch:15
  Normal zone: 0 pages used for memmap
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Built 1 zonelists.  Total pages: 65024
Kernel command line: root=/dev/ram console=ttyS0,115200 :::DB88FXX81:egiga0:none
PID hash table entries: 1024 (order: 10, 4096 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 256MB 0MB 0MB 0MB = 256MB total
Memory: 253696KB available (4128K code, 251K data, 124K init)
Calibrating delay loop... 1196.03 BogoMIPS (lpj=5980160)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
 
CPU Interface
-------------
SDRAM_CS0 ....base 00000000, size 256MB 
SDRAM_CS1 ....base 10000000, size 256MB 
SDRAM_CS2 ....disable
SDRAM_CS3 ....disable
PEX0_MEM ....base e8000000, size 128MB 
PEX0_IO ....base f2000000, size   1MB 
INTER_REGS ....base f1000000, size   1MB 
NFLASH_CS ....base fa000000, size   2MB 
SPI_CS ....base f4000000, size  16MB 
BOOT_ROM_CS ....no such
DEV_BOOTCS ....no such
CRYPT_ENG ....base f0000000, size   2MB 
 
  Marvell Development Board (LSP Version KW_LSP_4.3.4_patch30)-- DB-88F6281A-BP  Soc: 88F6281 A1 LE
 
 Detected Tclk 200000000 and SysClk 400000000 
MV Buttons Device Load
Marvell USB EHCI Host controller #0: c06d6600
PEX0 interface detected no Link.
PCI: bus0: Fast back to back transfers enabled
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
Time: kw_clocksource clocksource has been installed.
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
checking if image is initramfs...it isnt (no cpio magic); looks like an initrd
Freeing initrd memory: 1527K
cpufreq: Init kirkwood cpufreq driver
cpufreq: High frequency: 1200000KHz - Low frequency: 400000KHz
cpufreq: Setting CPU Frequency to 1200000 KHz
cpufreq: Setting PowerSaveState to off
XOR registered 1 NET_DMA over 4 channels
XOR 2nd invalidate WA enabled
cesadev_init(c00119d8)
mvCesaInit: sessions=640, queue=64, pSram=f0000000
Warning: TS unit is powered off.
MV Buttons Driver Load
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 3.3 (2007/10/31) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
SGI XFS with large block numbers, no debug enabled
io scheduler noop registered
io scheduler anticipatory registered (default)
Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
serial8250.0: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 10240K size 1024 blocksize
loop: module loaded
Loading Marvell Ethernet Driver:
  o Cached descriptors in DRAM
  o DRAM SW cache-coherency
  o Single RX Queue support - ETH_DEF_RXQ=0
  o Single TX Queue support - ETH_DEF_TXQ=0
  o TCP segmentation offload enabled
  o LRO support supported
  o Receive checksum offload enabled
  o Transmit checksum offload enabled
  o Network Fast Processing (Routing) supported
  o Driver ERROR statistics enabled
  o Driver INFO statistics enabled
  o Proc tool API enabled
  o SKB Reuse supported
  o SKB Recycle supported
  o Rx descripors: q0=128
  o Tx descripors: q0=532
  o Loading network interface(s):
    o  register under egiga0 platform
    o egiga0, ifindex = 1, GbE port = 0
 
Warning: Giga 1 is Powered Off
 
mvFpRuleDb (cfef2000): 2048 entries, 8192 bytes
Integrated Sata device found
scsi0 : Marvell SCSI to SATA adapter
scsi1 : Marvell SCSI to SATA adapter
scsi 0:0:0:0: Direct-Access     WDC      WD10EALS-00Z8A0  05.0 PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access     WDC      WD10EALS-00Z8A0  05.0 PQ: 0 ANSI: 5
scsi 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 0
NFTL driver: nftlcore.c $Revision: 1.1.1.1 $, nftlmount.c $Revision: 1.1.1.1 $
NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit)
Scanning device for bad blocks
Bad eraseblock 964 at 0x07880000
Using static partition definition
Creating 6 MTD partitions on "nand_mtd":
0x00000000-0x00100000 : "u-boot"
0x00100000-0x00600000 : "uImage"
0x00600000-0x00b00000 : "ramdisk"
0x00b00000-0x07100000 : "image"
0x07100000-0x07b00000 : "mini firmware"
0x07b00000-0x08000000 : "config"
ehci_marvell ehci_marvell.70059: Marvell Orion EHCI
ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1
ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100
ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
dm_crypt using the OCF package.
cpufreq: Setting CPU Frequency to 1200000 KHz
cpufreq: Setting PowerSaveState to off
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 124K
sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
 sda: sda1 sda2 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 23 00 10 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 23 00 10 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
 sdb: sdb1 sdb2 sdb4
sd 1:0:0:0: [sdb] Attached SCSI disk
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
egiga0: mac address changed
egiga0: link down
egiga0: started
egiga0: link up, full duplex, speed 1 Gbps
ext3: No journal on filesystem on sda4
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
ext3: No journal on filesystem on sdb4
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
md: md0 stopped.
md: bind<sdb1>
md: bind<sda1>
raid1: raid set md0 active with 2 out of 2 mirrors
md: md1 stopped.
md: bind<sdb2>
md: bind<sda2>
md1: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sda2
raid0:   comparing sda2(974119296) with sda2(974119296)
raid0:   END
raid0:   ==> UNIQUE
raid0: 1 zones
raid0: looking at sdb2
raid0:   comparing sdb2(974119296) with sda2(974119296)
raid0:   EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 1948238592 blocks.
raid0 : conf->hash_spacing is 1948238592 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 4 bytes for hash.
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on md1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 530040k swap on /dev/md0.  Priority:-1 extents:1 across:530040k
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
NTFS driver 2.1.28 [Flags: R/O MODULE].
usbcore: deregistering interface driver usb-storage

Output of /proc/meminfo on the D-Link DNS-313

Here the output of cat cat /proc/meminfo on the D-Link DNS-313:

MemTotal:        62472 kB
MemFree:          3312 kB
Buffers:          4672 kB
Cached:          11256 kB
SwapCached:        212 kB
Active:          26092 kB
Inactive:         4512 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:        62472 kB
LowFree:          3312 kB
SwapTotal:      506008 kB
SwapFree:       502796 kB
Dirty:               4 kB
Writeback:           0 kB
Mapped:          22620 kB
Slab:            25956 kB
CommitLimit:    537244 kB
Committed_AS:    54548 kB
PageTables:        576 kB
VmallocTotal:   188416 kB
VmallocUsed:       860 kB
VmallocChunk:   187388 kB

Output of /proc/cpuinfo on the D-Link DNS-313

Here the output of cat cat /proc/cpuinfo on the D-Link DNS-313:

Processor       : FA526id(wb) rev 1 (v4l)
BogoMIPS        : 231.01
Features        : swp half
CPU implementer : 0x66
CPU architecture: 4
CPU variant     : 0x0
CPU part        : 0x526
CPU revision    : 1
Cache type      : write-back
Cache clean     : cp15 c7 ops
Cache lockdown  : format B
Cache format    : Harvard
I size          : 16384
I assoc         : 2
I line length   : 16
I sets          : 512
D size          : 8192
D assoc         : 2
D line length   : 16
D sets          : 256
 
Hardware        : GeminiA
Revision        : 0000
Serial          : 0000000000000000

Output of /proc/cpuinfo on the D-Link DNS-343

Here the output of cat cat /proc/cpuinfo on the D-Link DNS-343:

Processor       : ARM926EJ-Sid(wb) rev 0 (v5l)
BogoMIPS        : 499.71
Features        : swp half thumb fastmult vfp edsp
CPU implementer : 0x41
CPU architecture: 5TEJ
CPU variant     : 0x0
 
CPU part        : 0x926
CPU revision    : 0
Cache type      : write-back
Cache clean     : cp15 c7 ops
Cache lockdown  : format C
Cache format    : Harvard
I size          : 32768
I assoc         : 1
 
I line length   : 32
I sets          : 1024
D size          : 32768
D assoc         : 4
D line length   : 32
D sets          : 256
 
Hardware        : Feroceon
Revision        : 0000
Serial          : 0000000000000000

store-passwd.sh for the D-Link DNS-320 Sharecenter Pulse

The D-Link DNS-320 needs a different store-passwd.sh than the one supplied with Fonz fun_plug. Basically it is very simple if you look at the contents:

#!/ffp/bin/sh
 
echo "Saving Userdata to /usr/local/config/"
cp -f /etc/passwd /usr/local/config/
cp -f /etc/group /usr/local/config/
cp -f /etc/shadow /usr/local/config/
cp -f /etc/samba/smbpasswd /usr/local/config/

Run the following command to download it to the NAS:

wget http://wolf-u.li/u/172/ -O /ffp/sbin/store-passwd.sh

Then proceed with the installation of Fonz fun_plug.

Output of dmesg on the D-Link DNS-320

Here the output of dmesg on the D-Link DNS-320:

Linux version 2.6.22.18 (bill@SWTEST3) (gcc version 4.2.1) #22 Tue Aug 10 11:59:29 CST 2010
CPU: ARM926EJ-S [56251311] revision 1 (ARMv5TE), cr=00053977
Machine: Feroceon-KW
Using UBoot passing parameters structure
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 32768
  DMA zone: 256 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 32512 pages, LIFO batch:7
  Normal zone: 0 pages used for memmap
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Built 1 zonelists.  Total pages: 32512
Kernel command line: root=/dev/ram console=ttyS0,115200 :::DB88FXX81:egiga0:none
PID hash table entries: 512 (order: 9, 2048 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB 0MB 0MB 0MB = 128MB total
Memory: 123776KB available (4028K code, 246K data, 124K init)
Calibrating delay loop... 796.26 BogoMIPS (lpj=3981312)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
 
CPU Interface
-------------
SDRAM_CS0 ....base 00000000, size 128MB
SDRAM_CS1 ....disable
SDRAM_CS2 ....disable
SDRAM_CS3 ....disable
PEX0_MEM ....base e8000000, size 128MB
PEX0_IO ....base f2000000, size   1MB
INTER_REGS ....base f1000000, size   1MB
NFLASH_CS ....base fa000000, size   2MB
SPI_CS ....base f4000000, size  16MB
BOOT_ROM_CS ....no such
DEV_BOOTCS ....no such
CRYPT_ENG ....base f0000000, size   2MB
 
  Marvell Development Board (LSP Version KW_LSP_4.3.4_patch30)-- DB-88F6281A-BP  Soc: 88F6281 A1 LE
 
 Detected Tclk 166666667 and SysClk 200000000
MV Buttons Device Load
Marvell USB EHCI Host controller #0: c0fb3600
PEX0 interface detected no Link.
PCI: bus0: Fast back to back transfers enabled
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
Time: kw_clocksource clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
checking if image is initramfs...it is not (no cpio magic); looks like an initrd
Freeing initrd memory: 1594K
cpufreq: Init kirkwood cpufreq driver
cpufreq: High frequency: 800000KHz - Low frequency: 200000KHz
cpufreq: Setting CPU Frequency to 800000 KHz
cpufreq: Setting PowerSaveState to off
XOR registered 1 NET_DMA over 4 channels
XOR 2nd invalidate WA enabled
cesadev_init(c00119d8)
mvCesaInit: sessions=640, queue=64, pSram=f0000000
Warning: TS unit is powered off.
MV Buttons Driver Load
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 3.3 (2007/10/31) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
JFFS2 version 2.2. (NAND) é 2001-2006 Red Hat, Inc.
SGI XFS with large block numbers, no debug enabled
io scheduler noop registered
io scheduler anticipatory registered (default)
Serial: 8250/16550 driver $Revision: 1.7 $ 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
serial8250.0: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 10240K size 1024 blocksize
loop: module loaded
Loading Marvell Ethernet Driver:
  o Cached descriptors in DRAM
  o DRAM SW cache-coherency
  o Single RX Queue support - ETH_DEF_RXQ=0
  o Single TX Queue support - ETH_DEF_TXQ=0
  o TCP segmentation offload enabled
  o LRO support supported
  o Receive checksum offload enabled
  o Transmit checksum offload enabled
  o Network Fast Processing (Routing) supported
  o Driver ERROR statistics enabled
  o Driver INFO statistics enabled
  o Proc tool API enabled
  o SKB Reuse supported
  o SKB Recycle supported
  o Rx descripors: q0=128
  o Tx descripors: q0=532
  o Loading network interface(s):
    o  register under egiga0 platform
    o egiga0, ifindex = 1, GbE port = 0
 
Warning: Giga 1 is Powered Off
 
mvFpRuleDb (c7d5d000): 1024 entries, 4096 bytes
Integrated Sata device found
scsi0 : Marvell SCSI to SATA adapter
scsi1 : Marvell SCSI to SATA adapter
scsi 0:0:0:0: Direct-Access     ATA      GB0500C4413           PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access     Seagate  ST3500630AS      3.AA PQ: 0 ANSI: 5
scsi 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 0
NFTL driver: nftlcore.c $Revision: 1.1.1.1 $, nftlmount.c $Revision: 1.1.1.1 $
NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit)
Scanning device for bad blocks
Bad eraseblock 854 at 0x06ac0000
Using static partition definition
Creating 6 MTD partitions on "nand_mtd":
0x00000000-0x00100000 : "u-boot"
0x00100000-0x00600000 : "uImage"
0x00600000-0x00b00000 : "ramdisk"
0x00b00000-0x07100000 : "image"
0x07100000-0x07b00000 : "mini firmware"
0x07b00000-0x08000000 : "config"
ehci_marvell ehci_marvell.70059: Marvell Orion EHCI
ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1
ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100
ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
dm_crypt using the OCF package.
cpufreq: Setting CPU Frequency to 800000 KHz
cpufreq: Setting PowerSaveState to off
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 124K
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
 sda: sda1 sda2 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 23 00 10 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 23 00 10 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
 sdb: sdb1 sdb2 sdb4
sd 1:0:0:0: [sdb] Attached SCSI disk
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
egiga0: mac address changed
egiga0: link down
egiga0: started
egiga0: link up, full duplex, speed 1 Gbps
ext3: No journal on filesystem on sda4
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
ext3: No journal on filesystem on sdb4
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ext3: No journal on filesystem on sda2
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
ext3: No journal on filesystem on sdb2
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Unable to find swap-space signature
NTFS driver 2.1.28 [Flags: R/O MODULE].
usbcore: deregistering interface driver usb-storage

Output of /proc/meminfo on the D-Link DNS-320

Here the output of cat cat /proc/meminfo on the D-Link DNS-320:

MemTotal:       125632 kB
MemFree:          9324 kB
Buffers:         17040 kB
Cached:          76964 kB
SwapCached:          0 kB
Active:          50308 kB
Inactive:        49620 kB
SwapTotal:           0 kB
SwapFree:            0 kB
Dirty:              12 kB
Writeback:           0 kB
AnonPages:        5940 kB
Mapped:           6812 kB
Slab:            13964 kB
SReclaimable:     4364 kB
SUnreclaim:       9600 kB
PageTables:        420 kB
NFS_Unstable:        0 kB
Bounce:              0 kB
CommitLimit:     62816 kB
Committed_AS:    37288 kB
VmallocTotal:   516096 kB
VmallocUsed:       972 kB
VmallocChunk:   515120 kB

Output of /proc/cpuinfo on the D-Link DNS-320

Here the output of cat cat /proc/cpuinfo on the D-Link DNS-320:

Processor       : ARM926EJ-S rev 1 (v5l)
BogoMIPS        : 796.26
Features        : swp half thumb fastmult edsp
CPU implementer : 0x56
CPU architecture: 5TE
CPU variant     : 0x2
CPU part        : 0x131
CPU revision    : 1
Cache type      : write-back
Cache clean     : cp15 c7 ops
Cache lockdown  : format C
Cache format    : Harvard
I size          : 16384
I assoc         : 4
I line length   : 32
I sets          : 128
D size          : 16384
D assoc         : 4
D line length   : 32
D sets          : 128
 
Hardware        : Feroceon-KW
Revision        : 0000
Serial          : 0000000000000000