Here the output of cat /proc/meminfo on the Conceptronic CH3WNAS:
total: used: free: shared: buffers: cached: Mem: 31035392 30347264 688128 0 1609728 22712320 Swap: 542826496 5353472 537473024 MemTotal: 30308 kB MemFree: 672 kB MemShared: 0 kB Buffers: 1572 kB Cached: 18508 kB SwapCached: 3672 kB Active: 16416 kB Inactive: 7728 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 30308 kB LowFree: 672 kB SwapTotal: 530104 kB SwapFree: 524876 kB
Here the output of cat /proc/meminfo on the Conceptronic CH3HNAS:
MemTotal: 60980 kB MemFree: 2336 kB Buffers: 8128 kB Cached: 33552 kB SwapCached: 0 kB Active: 11780 kB Inactive: 33072 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 8 kB Writeback: 0 kB AnonPages: 3192 kB Mapped: 3304 kB Slab: 7136 kB SReclaimable: 3936 kB SUnreclaim: 3200 kB PageTables: 256 kB NFS_Unstable: 0 kB Bounce: 0 kB CommitLimit: 30488 kB Committed_AS: 8504 kB VmallocTotal: 253952 kB VmallocUsed: 13700 kB VmallocChunk: 237564 kB
Here the output of cat /proc/meminfo on the D-Link DIR-685:
MemTotal: 125796 kB MemFree: 89376 kB Buffers: 3620 kB Cached: 11224 kB SwapCached: 0 kB Active: 16520 kB Inactive: 10944 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 125796 kB LowFree: 89376 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 0 kB Writeback: 0 kB Mapped: 15700 kB Slab: 4768 kB CommitLimit: 62896 kB Committed_AS: 17280 kB PageTables: 364 kB VmallocTotal: 122880 kB VmallocUsed: 34552 kB VmallocChunk: 87968 kB
Here the output of cat /proc/cpuinfo on the D-Link DIR-685:
Processor : FA526id(wb) rev 1 (v4l) BogoMIPS : 230.19 Features : swp half CPU implementer : 0x66 CPU architecture: 4 CPU variant : 0x0 CPU part : 0x526 CPU revision : 1 Cache type : write-back Cache clean : cp15 c7 ops Cache lockdown : format B Cache format : Harvard I size : 16384 I assoc : 2 I line length : 16 I sets : 512 D size : 8192 D assoc : 2 D line length : 16 D sets : 256 Hardware : GeminiA Revision : 0000 Serial : 0000000000000000
Here the output of cat /proc/cpuinfo on the Conceptronic CH3HNAS:
Processor : ARM926EJ-S rev 5 (v5l) BogoMIPS : 183.09 Features : swp half thumb fastmult edsp java CPU implementer : 0x41 CPU architecture: 5TEJ CPU variant : 0x0 CPU part : 0x926 CPU revision : 5 Cache type : write-back Cache clean : cp15 c7 ops Cache lockdown : format C Cache format : Harvard I size : 32768 I assoc : 4 I line length : 32 I sets : 256 D size : 32768 D assoc : 4 D line length : 32 D sets : 256 Hardware : Oxsemi NAS Revision : 0000 Serial : 00000acbcbed6e00
A few days ago i was asked if it would be possible to install PyLoad on the NAS-Systems. Pyload is a download-manager which is written in python and which provides a webinterface, a GUI Program and a CLI-Tool for management. The requestor needed a transfer-medium for his pictures. I found that interesting and investigated a little bit, but had to give up to get it natively running on Fonz fun_plug. I looked around the wiki of PyLoad and stumbled across optware. After a few problems i got everything together to get it running. A word of advice: Pyload needs about 40% of my 256MB Ram (D-Link DNS-325) when running, so if you experience performance-issues in transfers, maybe you should stop pyload first.
Continue reading Installation of PyLoad on Optware
This tutorial is deprecated, please use the tutorial for the current version.
If you need an advanced Mediaserver, Twonkymedia Server is one of the best choices. The Problem is that the installation of Twonkymedia Server 6 is a little bit more complicated than just running a Setup. Before you go on, please make sure that the Fonz fun_plug is installed. The following article has only been tested on the CH3SNAS, DNS-323. An Article for other devices can be found here. If you want to update to the newest version of twonky (and if you’ve already followed this article in the past), then check this out.
Continue reading Installation of Twonkymedia Server 6 on the Conceptronic CH3SNAS and the D-Link DNS-323
Many people asked me to compile various packages over the last few years. Sometimes i was able to help and sometimes (in rare occasions) i had to reject a request when it was impossible to fulfill it. Then i often told the requestor to install optware which originated from the NSLU2-Project and provides many addition packages. I didn’t have experienc on this, so i had to leave them in the dark. Until recently. Continue reading Installation of Optware on the D-Link DNS-320, DNS-321, DNS-325, DNS-343, DNS-345 and Conceptronic CH3MNAS
A few days ago i’ve written about the announcement of the D-Link DNS-325 “ShareCenter Shadow”. I was lucky and got the DNS-325 a few days before the release (which is today). So i made a few pictures which i wanted to share with you.
Continue reading Review und Test of the D-Link DNS-325 ShareCenter Shadow – First Pictures
After unpacking the D-Link DNS-325 i checked the performance of the DNS-325 in the Network. All these measurements were done in my home environment so be careful to see them as representative.
Continue reading Transfer rate and Networkperformance of the D-Link DNS-325