24 thoughts on “D-Link DNS-323”

  1. Hi,

    I have lost admin password to login through webconsole, I have enabled SSH to the device. Please suggest me how to reset admin(webconsole) password through SSH root login.


  2. Tried to set up ftp server and now when trying to ssh in:

    BusyBox v1.00-pre1 (2009.05.07-06:36+0000) Built-in shell (ash)
    Enter ‘help’ for a list of built-in commands.

    It is dead there at this time. Any clue what happedned? Doesn’t seem reasonable that setting up ftp would do anything to the fonz-plug set up. I have .5 installed.

      1. Not sure what you mean…I set up the FTP Server with the Webpage and didn’t change anything for ssh. I use putty to ssh to the box. And yes, the FTP Server is set to port 21. Is it going to the right busybox?

        1. PS…I forgot to say, when I ssh it lets me in then gives me: BusyBox v1.00-pre1 (2009.05.07-06:36+0000) Built-in shell (ash)
          Enter ‘help’ for a list of built-in commands. It’s effectively dead.

      2. Ok, Got in with:

        ssh root@fileserver /ffp/bin/sh redid the usermods and store-passwd.sh and all appears ok. Setting the ftp server to the root changed the home dirs. It also was going to the DNS-s original Busybox. Hopefully all is well now.

  3. Please the harddisk on my NAS is full. If I remove the disk I can view the status from Disk Management unitily on windows. However, I cannot access the disk from the mapped locations and even when I try logging into the device using the web interface. It throws me out saying username/password incorrect and I dont hv a backup of the data in the NAS-323

    1. Hi, don’t worry your data is still on the nas. You can reset your NAS (except the harddisks with your data) by holding the reset button on the back more than 10 seconds. Then search and configure your NAS as usual.

      Best Regards,

  4. Hi, I want to remote access the FTP server from DNS 321 server and connect to an internert FTP server and start transfers and let the transfer to be executed after I turn off my remote access. To access and start the “FXP like transfer” I want o use my iPhone…. Any idea in how to achieve this?

  5. Cannot Stream From my DLink DNS323 Anymore

    I have a DNS-323 and wanted to stream my videos that are on it to my smart TV and iPad.
    This worked after I enabled the UPnP server on the DNS-323 and pointed him to a ‘Multimedia’ folder in which my videos were located.
    Everything worked fine, but I noticed after a while that new videos and folders weren’t shown on my TV or iPad.
    I tried several things (refreshing, selected the root again, rebooting the DNS-323, …) but nothing worked.
    Now, when I try to access the videos on the DNS-323, I both get on my TV and iPad the message that there are no files/videos to shown.

    When I access the DNS-323 via my PC, there is no problem, I see all files.
    My DNS-323 has firmware version 1.07. Preferably I would a solution.

    Does anyone has a solution for my problem ?

  6. I have a d-link with locked files, is it possible to unlock the files so they can be copied and opened for use.

  7. I have the same issue – I have enabled UPNP on my DNS 323 NAS and I can see the device using my Samsung Smart TV, but it reports that no Content is available in the folders I have shared. I have tried sharing the ROOT and specific folders and I have also installed Serviio, hoping that would help.

    Any ideas on how to make the contect accessible

  8. Hi, I have forgotten the admin password on my DNS-323. Don’t dare to “Hard reset” it as I worry about all the files on the harddisks. Is there any other way I can reset the admin password?

    1. Hopefully You have received an answer long ago, but if not I can tell you that all your files are safe even with a hard reset.
      As far as I know, the hard reset is the only way to get in and change your pwd.

  9. Hi

    I just bought a D-Link 323. I want to install it but have data on my drives I dont want to lose: when I try to install it tells me it will format the drive. Is there anyway around this?


  10. Hi again,

    Hope this page is still being used. I have fw 1.09 and fun_plug .5. I did a search and can’t find a definitive answer. How do you upgrade fw on the DNS-323 if you have fun_plug installed?

  11. Hello, how you doing?

    This firmware is compatible to deploy in DNS-726-4?
    I just got this NVR DNS-726-4 by mistake, i just need a real NAS, nothing else.

    Can i use this firmware to replace the original?

    Thansk and Regards.

      1. Thanks for your Quick reply.
        O already tried, bit the interface refuse to upload the file. I checked the hardware and is exactly the same like DNS-323. Even buttons, chips and parts position in the mainboard.

Leave a Reply to Daniel Cancel reply

Your email address will not be published. Required fields are marked *

Exit mobile version