Output of dmesg on the D-Link DNS-320

Here the output of dmesg on the D-Link DNS-320:

Linux version 2.6.22.18 (bill@SWTEST3) (gcc version 4.2.1) #22 Tue Aug 10 11:59:29 CST 2010
CPU: ARM926EJ-S [56251311] revision 1 (ARMv5TE), cr=00053977
Machine: Feroceon-KW
Using UBoot passing parameters structure
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 32768
  DMA zone: 256 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 32512 pages, LIFO batch:7
  Normal zone: 0 pages used for memmap
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Built 1 zonelists.  Total pages: 32512
Kernel command line: root=/dev/ram console=ttyS0,115200 :::DB88FXX81:egiga0:none
PID hash table entries: 512 (order: 9, 2048 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB 0MB 0MB 0MB = 128MB total
Memory: 123776KB available (4028K code, 246K data, 124K init)
Calibrating delay loop... 796.26 BogoMIPS (lpj=3981312)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
 
CPU Interface
-------------
SDRAM_CS0 ....base 00000000, size 128MB
SDRAM_CS1 ....disable
SDRAM_CS2 ....disable
SDRAM_CS3 ....disable
PEX0_MEM ....base e8000000, size 128MB
PEX0_IO ....base f2000000, size   1MB
INTER_REGS ....base f1000000, size   1MB
NFLASH_CS ....base fa000000, size   2MB
SPI_CS ....base f4000000, size  16MB
BOOT_ROM_CS ....no such
DEV_BOOTCS ....no such
CRYPT_ENG ....base f0000000, size   2MB
 
  Marvell Development Board (LSP Version KW_LSP_4.3.4_patch30)-- DB-88F6281A-BP  Soc: 88F6281 A1 LE
 
 Detected Tclk 166666667 and SysClk 200000000
MV Buttons Device Load
Marvell USB EHCI Host controller #0: c0fb3600
PEX0 interface detected no Link.
PCI: bus0: Fast back to back transfers enabled
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
Time: kw_clocksource clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
checking if image is initramfs...it is not (no cpio magic); looks like an initrd
Freeing initrd memory: 1594K
cpufreq: Init kirkwood cpufreq driver
cpufreq: High frequency: 800000KHz - Low frequency: 200000KHz
cpufreq: Setting CPU Frequency to 800000 KHz
cpufreq: Setting PowerSaveState to off
XOR registered 1 NET_DMA over 4 channels
XOR 2nd invalidate WA enabled
cesadev_init(c00119d8)
mvCesaInit: sessions=640, queue=64, pSram=f0000000
Warning: TS unit is powered off.
MV Buttons Driver Load
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 3.3 (2007/10/31) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
JFFS2 version 2.2. (NAND) é 2001-2006 Red Hat, Inc.
SGI XFS with large block numbers, no debug enabled
io scheduler noop registered
io scheduler anticipatory registered (default)
Serial: 8250/16550 driver $Revision: 1.7 $ 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
serial8250.0: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 10240K size 1024 blocksize
loop: module loaded
Loading Marvell Ethernet Driver:
  o Cached descriptors in DRAM
  o DRAM SW cache-coherency
  o Single RX Queue support - ETH_DEF_RXQ=0
  o Single TX Queue support - ETH_DEF_TXQ=0
  o TCP segmentation offload enabled
  o LRO support supported
  o Receive checksum offload enabled
  o Transmit checksum offload enabled
  o Network Fast Processing (Routing) supported
  o Driver ERROR statistics enabled
  o Driver INFO statistics enabled
  o Proc tool API enabled
  o SKB Reuse supported
  o SKB Recycle supported
  o Rx descripors: q0=128
  o Tx descripors: q0=532
  o Loading network interface(s):
    o  register under egiga0 platform
    o egiga0, ifindex = 1, GbE port = 0
 
Warning: Giga 1 is Powered Off
 
mvFpRuleDb (c7d5d000): 1024 entries, 4096 bytes
Integrated Sata device found
scsi0 : Marvell SCSI to SATA adapter
scsi1 : Marvell SCSI to SATA adapter
scsi 0:0:0:0: Direct-Access     ATA      GB0500C4413           PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access     Seagate  ST3500630AS      3.AA PQ: 0 ANSI: 5
scsi 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 0
NFTL driver: nftlcore.c $Revision: 1.1.1.1 $, nftlmount.c $Revision: 1.1.1.1 $
NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit)
Scanning device for bad blocks
Bad eraseblock 854 at 0x06ac0000
Using static partition definition
Creating 6 MTD partitions on "nand_mtd":
0x00000000-0x00100000 : "u-boot"
0x00100000-0x00600000 : "uImage"
0x00600000-0x00b00000 : "ramdisk"
0x00b00000-0x07100000 : "image"
0x07100000-0x07b00000 : "mini firmware"
0x07b00000-0x08000000 : "config"
ehci_marvell ehci_marvell.70059: Marvell Orion EHCI
ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1
ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100
ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
dm_crypt using the OCF package.
cpufreq: Setting CPU Frequency to 800000 KHz
cpufreq: Setting PowerSaveState to off
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 124K
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
 sda: sda1 sda2 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 23 00 10 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 23 00 10 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
 sdb: sdb1 sdb2 sdb4
sd 1:0:0:0: [sdb] Attached SCSI disk
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
egiga0: mac address changed
egiga0: link down
egiga0: started
egiga0: link up, full duplex, speed 1 Gbps
ext3: No journal on filesystem on sda4
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
ext3: No journal on filesystem on sdb4
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ext3: No journal on filesystem on sda2
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
ext3: No journal on filesystem on sdb2
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Unable to find swap-space signature
NTFS driver 2.1.28 [Flags: R/O MODULE].
usbcore: deregistering interface driver usb-storage

Output of /proc/meminfo on the D-Link DNS-320

Here the output of cat cat /proc/meminfo on the D-Link DNS-320:

MemTotal:       125632 kB
MemFree:          9324 kB
Buffers:         17040 kB
Cached:          76964 kB
SwapCached:          0 kB
Active:          50308 kB
Inactive:        49620 kB
SwapTotal:           0 kB
SwapFree:            0 kB
Dirty:              12 kB
Writeback:           0 kB
AnonPages:        5940 kB
Mapped:           6812 kB
Slab:            13964 kB
SReclaimable:     4364 kB
SUnreclaim:       9600 kB
PageTables:        420 kB
NFS_Unstable:        0 kB
Bounce:              0 kB
CommitLimit:     62816 kB
Committed_AS:    37288 kB
VmallocTotal:   516096 kB
VmallocUsed:       972 kB
VmallocChunk:   515120 kB

Output of /proc/cpuinfo on the D-Link DNS-320

Here the output of cat cat /proc/cpuinfo on the D-Link DNS-320:

Processor       : ARM926EJ-S rev 1 (v5l)
BogoMIPS        : 796.26
Features        : swp half thumb fastmult edsp
CPU implementer : 0x56
CPU architecture: 5TE
CPU variant     : 0x2
CPU part        : 0x131
CPU revision    : 1
Cache type      : write-back
Cache clean     : cp15 c7 ops
Cache lockdown  : format C
Cache format    : Harvard
I size          : 16384
I assoc         : 4
I line length   : 32
I sets          : 128
D size          : 16384
D assoc         : 4
D line length   : 32
D sets          : 128
 
Hardware        : Feroceon-KW
Revision        : 0000
Serial          : 0000000000000000

Softwaredetails of the Conceptronic CH3SNAS

Supported protocols

Configuration interface showing servers
A computer or user can communicate with the CH3SNAS using a range of protocols.

Servers

  • SMB/CIFS server
    This provides the basic file server functionality on the local-area network.
  • FTP server
    This is mainly for allowing the files to be accessed via the Internet. Such access will normally require some configuration of the home router/gateway as general access from the outside to devices on the LAN is normally filtered by the gateway’s firewall function. A typical router (e.g. Linksys WRT54G) can be configured to direct incoming ftp requests (port 21) to the IP address of the NAS. The NAS, in turn, can be configured via the browser interface to only allow access to some directories, to request a user/password or to give only read access.
  • Print server
    Technically this is part of the SMB/CIFS protocol suite. It allows the CH3SNAS to act as a print server on the local network.
  • uPnP (Universal Plug-and-Play)
    This is a set of protocols which allows the CH3SNAS to be discovered as a source of multimedia (music, video, pictures) and to allow a uPnP-enabled rendering device such as a network-enabled video renderer to see and access the available media. Probably the most common current uPnP-enabled rendering devices are Windows PCs running Microsoft Media Player.
  • iTunes server
    Essentially iTunes is, as a networking protocol, Apple’s proprietary counterpart to uPnP. Common iTunes rendering devices are computers running
  • HTTP server (limited)
    There is a small HTTP server to generate and process the HTML forms used to configure the CH3SNAS. That configuration interface can be accessed via a web browser using a computer on the local-area network (or if desired – mind the security – from the Internet). This HTTP server process is known as “Webs” and is from GoAhead. Users interested in using an HTTP server for other uses should consider installing the Lighttpd package under fun_plug.
  • DHCP server
    In case the CH3SNAS is used in a network without a DHCP server, the CH3SNAS can be configured to provided all devices with a unique IP-address. This will presumably be seldom used, but can help if you want to connect the CH3SNAS to, for example, a stand-alone laptop. The laptop sees a more or less fully functioning network without having to temporarily reconfigure the laptop to use static IP address.

Clients

  • NTP client
    The CH3SNAS can use the Network Time Protocol to get the current time from NTP servers on the internet.
  • DHCP client
    Although the CH3SNAS can be bound to a fixed IP address, it can also get its IP address from a local DHCP server.
  • E-mail client
    The CH3SNAS can be configured to automatically send e-mail to its administrator to notify about certain events.
  • FTP client
    The CH3SNAS can be configured to automatically download files at scheduled times from an FTP server.
  • HTTP client
    The CH3SNAS can be configured to automatically download files at scheduled times from an HTTP server.

Client/server

  • Telnet (requires fun_plug)
    The CH3SNAS contains support for establishing telnet sessions, whereby a remote user can login to the machine via an unsecure connection.
  • SSH (requires fun_plug)
    SSH is a modern successor to telnet. SSH fixes security problems in telnet by encrypting traffic between both machines.

Available firmware and upgrades

Conceptronic regularly provides updates of the firmware (embedded software, or if you like: operating system and servers) inside the CH3SNAS. These are available for download at Conceptronic.net. Test versions (betas and “release candidates”) are also made available for a more technical audience.

You may want to see our overview on all versions to see the new features and if any major issues have been reported. There is also a guide on upgrading the firmware available here

[ return to CH3SNAS page ]

Private-Public-Key-Authentication with OpenSSH in ffp

If you have to login to your NAS frequently, you might want to automate this process a little. One of the functions of openssh is the authentication via Private/Public-Key, which will be described for the user ”root” in the following tutorial. Of course you can adapt this tutorial to other users.

Changing the home of the user
By default, the home directory of the user ”root” is set to /home, which is located in the internal flash-memory. This memory is deleted every time the device is rebooted. Thus the home-directory of the root-user should be used to the directory of ffp.

mkdir -p /ffp/home/root/
usermod -d /ffp/home/root/ root
store-passwd.sh

You need to repeat the last two steps every time your firmware gets upgraded.

Generating the keypair

mkdir /ffp/home/root/.ssh
cd /ffp/home/root/.ssh

There are now two choices for the key. You can either have a password (which can automatically be entered by ssh-agent or PuttY Pageant) or no password. Both ways are described below and will generate two files named keypair and keypair.pub which contain the private and public key needed for the authentication:

  • Without Password
    ssh-keygen -f keypair -C 'Generated by nas-tweaks.net' -t rsa -q
  • With Password
    ssh-keygen -f keypair -C 'Generated by nas-tweaks.net' -N '' -t rsa -q

Activating authorized_keys in SSH
Open /ffp/etc/ssh/sshd_config and search for the following line:

#PubkeyAuthentication yes

And remove the comment:

PubkeyAuthentication yes

Moving the generated keys to authorized_keys

touch authorized_keys
chmod 600 authorized_keys
cat keypair.pub >> authorized_keys

Adding the private Key to the client
To copy the private keyfile to the client, you can choose between different ways depending on the available OS and programs.

  • Windows
    Download and install WinSCP and connect to your NAS-Device. Copy the File ~/.ssh/keypair to the client into a secure location.
  • Linux
    On the NAS-Device enter the following command with your credentials to copy the key to the client ”remote-system”:
    cat ~/.ssh/keypair | ssh user@remote-system 'umask 077; cat >>~/.ssh/authorized_keys'

Busybox

This article assumes fun_plug is installed. It only explains what busybox is and how it works, so don’t expect to learn new useful Linux tricks.

Busybox calls itself “The Swiss Army Knife of Embedded Linux”. It is a single program that provides over 60 commonly used commands that are normally available on the Linux command line. Examples of such commands:

ls lists what’s in a directory
mkdir creates directories
tar creates/opens tarball files containing multiple files
cp copies files

In a standard Linux distribution these commands are separate programs. Busybox implements these programs (occasionally with somewhat reduced options) as a single executable program. Hence the “Swiss army knife” slogan. This saves space and maybe loading time, which is important for embedded Linux implementations.

To see what programs are handled by Busybox on the CH3SNAS you can use the following command within an ssh (PuTTY) session:

cd /bin
ls -l | more

The piping via more allows you to view the folder listing produced ls at your own pace. Use the spacebar to see more of the listing, and q to quit the more utility. The output will contain dozens of lines like:

lrwxrwxrwx    1 root     root            7 Apr  1 12:53 ln -> busybox
lrwxrwxrwx    1 root     root            7 Apr  1 12:53 ls -> busybox
lrwxrwxrwx    1 root     root            7 Apr  1 12:53 md5sum -> busybox
lrwxrwxrwx    1 root     root            7 Apr  1 12:53 mesg -> busybox
lrwxrwxrwx    1 root     root            7 Apr  1 12:53 mkdir -> busybox

Essentially this says that, for example, the file /bin/ls is a symbolic link (“->”) to the program /bin/busybox. You can get a feel for for this by trying

busybox ls -l /bin/busybox

yourself and seeing that it performs the same as typing ls -l /bin/busybox directly. Typing busybox without any parameters gives information like the program version and a list of all supported commands.

Output of /proc/cpuinfo on the Conceptronic CH3SNAS

Here the output of cat /proc/cpuinfo on the Conceptronic CH3SNAS:

Processor       : ARM926EJ-Sid(wb) rev 0 (v5l)
BogoMIPS        : 331.77
Features        : swp half thumb fastmult edsp java
CPU implementer : 0x41
CPU architecture: 5TEJ
CPU variant     : 0x0
CPU part        : 0x926
CPU revision    : 0
Cache type      : write-back
Cache clean     : cp15 c7 ops
Cache lockdown  : format C
Cache format    : Harvard
I size          : 32768
I assoc         : 1
I line length   : 32
I sets          : 1024
D size          : 32768
D assoc         : 1
D line length   : 32
D sets          : 1024
 
Hardware        : MV-88fxx81
Revision        : 0000
Serial          : 0000000000000000

Output of dmesg on the Conceptronic CH3MNAS

Here the output of dmesg on the Conceptronic CH3MNAS.

Linux version 2.6.22.7 (eve@SWTEST1) (gcc version 3.4.4 (release) (CodeSourcery ARM 2005q3-2)) #85 Thu Mar 26 09:48:50 CST 2009
CPU: ARM926EJ-S [41069260] revision 0 (ARMv5TEJ), cr=a0053177
Machine: Feroceon
Using UBoot passing parameters structure
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 16384
  DMA zone: 128 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 16256 pages, LIFO batch:3
  Normal zone: 0 pages used for memmap
CPU0: D VIVT write-back cache
CPU0: I cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets
CPU0: D cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets
Built 1 zonelists.  Total pages: 16256
Kernel command line: root=/dev/ram console=ttyS0,115200 :::DB88FXX81:egiga0:none
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB 0MB 0MB 0MB = 64MB total
Memory: 53168KB available (2880K code, 190K data, 124K init)
Calibrating delay loop... 332.59 BogoMIPS (lpj=1662976)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Sys Clk = 166666667, Tclk = 166666667
 
CPU Interface
-------------
SDRAM_CS0 ....base 00000000, size  64MB 
SDRAM_CS1 ....disable
SDRAM_CS2 ....disable
SDRAM_CS3 ....disable
PEX0_MEM ....base e0000000, size 128MB 
PEX0_IO ....base f2000000, size   1MB 
PCI0_MEM ....base e8000000, size 128MB 
PCI0_IO ....base f2100000, size   1MB 
INTER_REGS ....base f1000000, size   1MB 
DEVICE_CS0 ....no such
DEVICE_CS1 ....no such
DEVICE_CS2 ....no such
DEV_BOOCS ....base ff000000, size  16MB 
CRYPT_ENG ....base f0000000, size  64KB 
 
  Marvell Development Board (LSP Version 3.0.5_NAS_GDP)-- RD-88F5182-NAS-2  Soc: 88F5182 A2
 
 Detected Tclk 166666667 and SysClk 166666667 
Marvell USB EHCI Host controller #0: c1072600
Marvell USB EHCI Host controller #1: c1072400
PCI: bus0: Fast back to back transfers enabled
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
Time: orion_clocksource clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
checking if image is initramfs...it isnt (no cpio magic); looks like an initrd
Freeing initrd memory: 8503K
RTC registered
Use the XOR engines (acceleration) for enhancing the following functions:
  o RAID 5 Xor calculation
  o kernel memcpy
  o kenrel memzero
  o copy user to/from kernel buffers
Number of XOR engines to use: 2
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 3.3 (2007/10/31) Phillip Lougher
io scheduler noop registered
io scheduler anticipatory registered (default)
Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A
serial8250.0: ttyS1 at MMIO 0xf1012100 (irq = 4) is a 16550A
RAMDISK driver initialized: 2 RAM disks of 14336K size 1024 blocksize
loop: module loaded
Marvell Ethernet Driver 'mv_ethernet':
  o Uncached descriptors in DRAM
  o DRAM SW cache-coherency
  o TCP segmentation offload enabled
  o Checksum offload enabled
  o Marvell ethtool proc enabled
  o Rx desc: 128
  o Tx desc: 256
  o Loading network interface 'egiga0' 
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
Intergrated Sata device found
scsi0 : Marvell SCSI to SATA adapter
scsi1 : Marvell SCSI to SATA adapter
scsi 0:0:0:0: Direct-Access     SAMSUNG  HD203WI          1AN1 PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access     SAMSUNG  HD203WI          1AN1 PQ: 0 ANSI: 5
scsi 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 0
physmap-flash.0: failed to claim resource 0
flash VppMin = "0" , VppMax = "0"
cfi_flash_0: Found 1 x16 devices at 0x0 in 8-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
cfi_flash_0: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 6 MTD partitions on "cfi_flash_0":
0x00000000-0x00020000 : "MTD1"
0x00020000-0x00040000 : "MTD2"
0x00040000-0x00240000 : "Linux Kernel"
0x00240000-0x00c40000 : "File System"
0x00f80000-0x01000000 : "u-boot"
0x00c40000-0x00f80000 : "Module"
ehci_marvell ehci_marvell.4523: Marvell Orion EHCI
ehci_marvell ehci_marvell.4523: new USB bus registered, assigned bus number 1
ehci_marvell ehci_marvell.4523: irq 17, io base 0xf1050100
ehci_marvell ehci_marvell.4523: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci_marvell ehci_marvell.167817: Marvell Orion EHCI
ehci_marvell ehci_marvell.167817: new USB bus registered, assigned bus number 2
ehci_marvell ehci_marvell.167817: irq 12, io base 0xf10a0100
ehci_marvell ehci_marvell.167817: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
EXT2-fs warning: maximal mount count reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 124K
usb 1-1: new high speed USB device using ehci_marvell and address 2
usb 1-1: configuration #1 chosen from 1 choice
sd 0:0:0:0: [sda] 3907029168 512-byte hardware sectors (2000399 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:0:0: [sda] 3907029168 512-byte hardware sectors (2000399 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
 sda: sda1 sda2 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 23 00 10 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 1:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 23 00 10 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
 sdb: sdb1 sdb2 sdb4
sd 1:0:0:0: [sdb] Attached SCSI disk
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
egiga0: mac address changed
egiga0: link down
Adding 530104k swap on /dev/sda1.  Priority:-1 extents:1 across:530104k
Adding 530104k swap on /dev/sdb1.  Priority:-2 extents:1 across:530104k
egiga0: link up, full duplex, speed 1 Gbps
ext3: No journal on filesystem on sda4
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
ext3: No journal on filesystem on sdb4
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
ext3: No journal on filesystem on sda2
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
ext3: No journal on filesystem on sdb2
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
ext3: No journal on filesystem on sda2
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
ext3: No journal on filesystem on sdb2
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
ext3: No journal on filesystem on sda4
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
ext3: No journal on filesystem on sdb4
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended

Output of /proc/cpuinfo on the Xtreamer eTRAYz

Here the output of cat /proc/cpuinfo on the Xtreamer eTRAYz:

Processor       : ARM926EJ-S rev 5 (v5l)
BogoMIPS        : 183.09
Features        : swp half thumb fastmult edsp java
CPU implementer : 0x41
CPU architecture: 5TEJ
CPU variant     : 0x0
CPU part        : 0x926
CPU revision    : 5
Cache type      : write-back
Cache clean     : cp15 c7 ops
Cache lockdown  : format C
Cache format    : Harvard
I size          : 32768
I assoc         : 4
I line length   : 32
I sets          : 256
D size          : 32768
D assoc         : 4
D line length   : 32
D sets          : 256
 
Hardware        : Oxsemi NAS
Revision        : 0000
Serial          : 00000b01fa72a580

Output of /proc/meminfo on the Xtreamer eTRAYz

Here the output of cat cat /proc/meminfo on the Xtreamer eTRAYz:

MemTotal:       126052 kB
MemFree:         21576 kB
Buffers:          6324 kB
Cached:          48760 kB
SwapCached:          0 kB
Active:          59544 kB
Inactive:        35800 kB
SwapTotal:      499896 kB
SwapFree:       499896 kB
Dirty:               8 kB
Writeback:           0 kB
AnonPages:       40280 kB
Mapped:          15280 kB
Slab:             5392 kB
SReclaimable:     1816 kB
SUnreclaim:       3576 kB
PageTables:       1332 kB
NFS_Unstable:        0 kB
Bounce:              0 kB
CommitLimit:    562920 kB
Committed_AS:   298872 kB
VmallocTotal:   253952 kB
VmallocUsed:      4352 kB
VmallocChunk:   249600 kB
Exit mobile version